Annual fire inspection checklist
The annual is a bundle. The misses are always one asset class. Walk the list, then store each report on its asset.
People book "the annual" as if it were one job on one Tuesday. Extinguishers, the fire alarm, sprinklers, emergency lights, fire doors and the kitchen hood often sit on different months and different vendors. The fire marshal still walks the building once and asks about all of it. A checklist keeps each class from disappearing behind the class that got attention last quarter. FireCert Clock turns the checklist into dated assets with files attached, so the overdue list shows the gap before the inspector names it in the report.
Walk the classes
Portable extinguishers. Annual maintenance by a qualified person, plus any overdue monthly visual walks your program requires. Printable monthly tag rows, separate from the yearly contractor visit, are on the fire extinguisher inspection checklist.
Fire alarm. The annual test and device work your licensed vendor runs under NFPA 72 for your occupancy. The signed file is the fire alarm inspection report. The multi system writeup is the fire inspection report.
Sprinklers. Annual items from NFPA 25 plus any five-year internal work due this calendar year.
Fire pump. Weekly or monthly churn and the annual flow test from NFPA 25 (2023) are on the fire pump test schedule, with a printable log.
Emergency lighting. Monthly functional tests and the annual ninety-minute discharge where your code requires it.
Fire doors. The annual visual or formal inspection your AHJ expects on rated openings.
Kitchen suppression. If the building has a commercial hood, the cylinder service interval is often semiannual and easy to forget when you only think about extinguishers.
Add each class as one or more assets on the site. Split further when two tasks on the same system use different intervals.
Before the inspector arrives
Open the overdue list on the site. Red rows are the conversation you want to finish before the walk, not during it. Download the site PDF and mark which vendor owns which class. Send that PDF to contractors with this checklist so scope arguments happen early.
Upload last year's reports now if they live in email. You do not need every date perfect on day one. You need a visible gap list.
After the week of visits
Upload each report to the matching asset. On Starter and above, confirm the service date and next due date the product reads from the PDF. The 30-day, 14-day, 7-day, 3-day and 1-day notices start the next cycle. The overdue list shows the class that still has no visit logged.
Pro puts your logo on the client-facing site PDF when you hand results to the owner. Business adds API access and CSV export when you integrate with other systems.
Who gets mail
You receive reminders on every plan. Add the property manager or each contractor as a client contact on Starter. Technicians can subscribe to iCal feeds for assets assigned to them.
Free is $0 a month for 1 site and 25 assets. Starter is $39 a month for 10 sites, 500 assets, client emails and AI date reading. See pricing for Pro and Business limits.
Intervals hiding inside one annual
Treat each class as its own clock. Extinguisher maintenance uses a 365 day NFPA 10 interval. Alarm work can use a 365 day NFPA 72 interval, with shorter device tasks when the contract names them. Sprinklers use a 365 day NFPA 25 interval for the main drain, and 1825 days for the five-year internal when that year is due. Emergency lights use 30 days for the 30 second functional test and 365 days for the 90 minute discharge under NFPA 101. Doors follow the interval your AHJ expects. Many programs store the formal door walk as 365 days. Kitchen suppression is often about half a year. A hood gap stored as 182 days is its own asset. Confirm each number with the AHJ before you promise every trade the same Tuesday.
What each class file should contain
Extinguisher files need location, agent, tag month, and the maintenance record. Alarm files need the contractor report, panel id, and the dates tested. Sprinkler files need the valve or drain id and the signed test. Light files need the fitting id, pass or fail, and whether the run was 30 seconds or 90 minutes. Door files need the opening id, closer, latch, label, and any wedge. Hood files need the system name and the service company ticket. The site PDF bundles those files. It does not merge them into one signature.
Who signs which class
The trade that did the work signs that class. In-house staff may initial monthly visuals. Logging a passing visit moves only that asset. FireCert Clock does not sign for the vendor and does not book the truck.
Failures that look like one missed Tuesday
Six trades get penciled onto one afternoon, then the alarm company was never on the purchase order. The five-year internal falls in the same calendar year as the drain and never gets a line. A school reopening reuses last winter's date. The extinguisher crew finishes in May and everyone assumes the hood rode along.
Worked dates for Oak Court
Extinguisher cabinet on a 365 day NFPA 10 maintenance interval. Last service 15 May 2025. Next due 15 May 2026. Notices: 15 April, 1 May, 8 May, 12 May and 14 May 2026. Main drain on a 365 day NFPA 25 interval. Last test 3 November 2025. Next due 3 November 2026. Notices: 4 October, 20 October, 27 October, 31 October and 2 November 2026. Hood stored as 182 days. Last ticket 3 February 2026. Next due 4 August 2026. If 1 October 2026 arrives with no passing hood visit, that row is 58 days overdue while the drain is still ahead and the May extinguisher visit is already filed. The overdue list is the checklist.
A hood clean is not an item on the annual equipment list. The interval you type yourself is kitchen hood cleaning frequency. A UK assessment review date, which this checklist also does not move, is fire risk assessment review reminders.
FAQ
Can I print this for the contractor?
Yes. Send the site PDF plus this class list so they know what you think is in scope.
Is this the AHJ's official list?
No. Your fire marshal names the official scope. Edit anything that does not match.
Can I track only one class on Free?
Yes. Twenty-five assets is enough for a small site if you split tasks sensibly.
Does the product schedule the vendors?
No. It reminds you and stores reports. You still book the trades.
Can I import last year's asset list?
Yes. CSV with site, asset type, location and last service date.
What if a class failed inspection?
Log a visit only when the work passes, since logging moves the next due date.
Mixed occupancies
Retail plus residential in one building often means different alarm and sprinkler obligations per wing. Separate assets per wing when intervals differ.
Seasonal buildings
Schools and vacation properties sometimes skip winter checks. Set the interval when you add each asset for the reopening cycle rather than assuming the old date still applies.
Insurance renewals
Risk engineers ask for life safety evidence across classes. The site PDF bundles every class with attachments instead of six separate email searches.
When the owner asks for a single packet before renewal, export one PDF rather than assembling binders from three vendors.
Contractor handoff meetings
Start each annual cycle with a fifteen-minute call using the site PDF as the agenda. Ask each vendor to confirm which assets they own. Set the interval and technician when you add each asset so iCal feeds and client contacts match reality before the first due date slips.
Class sign-off questions
Who signs each class on the packet?
The trade that performed it. The site PDF shows their file. It does not add a software signature on top.
What does 1 October show at Oak Court?
The hood from 4 August is 58 days overdue if nobody logged a passing visit. The November drain is still ahead. The May extinguisher file is already attached.
Which miss becomes a red row?
Any class with no passing visit after its own due date. A finished extinguisher crew does not clear the hood.
Support and Terms. Calculator.